Dell N1100-ON, Справочное руководство

Страница: 1375 / 2332

Layer 3 Routing Commands
1375
UPDATE Send Failures....................... 0
Current Members: 172.24.3.1, 172.25.8.56, 172.28.9.1
Version Delta T Duration UPD Built UPD Sent Paths Sent Pfxs Adv Pfxs Wd
10 00:00:49 100 6 288 5 1250 750
show ip bgp vpn4
Use the show ip bgp vpn4 command to display the VPNv4 address
information from the BGP table. If the vrf argument is specified, the address
information pertaining to that VRF is displayed.
Syntax
show ip bgp vpnv4 {all | rd route-distinguisher [ipprefix/length] | vrf vrf-
name [ ip-prefix/length ] | statistics }
• all — Displays the complete VPNv4 database.
• rd route-distinguisher—Displays the NLRI prefixes that match the named
route distinguisher.
• vrf vrf-name—Displays the NLRI prefixes associated with the named VRF
instance.
• ip-prefix/length — IP address of a network in the routing table and the
length of the mask (0 to 32). The slash mark must be included.
• statistics — Displays BGP VPNv4 statistics
Default Configuration
There is no default configuration.
Command Mode
Privileged Exec and Global Configuration modes
User Guidelines
The format and field descriptions are the same as for show ip bgp neighbors
with the following exceptions:
• If the peer address (“Remote Address”) is a link local address, the next line
of output indicates the scope of the address.