Hard Drive and Fixed Optical Drive : Dell Latitude V700 Service Manual
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface on the computer.
Removing the Hard Drive
NOTICE:
To avoid damaging the system board, you must remove the battery before you
service the computer.
NOTICE:
Make sure that the work surface is clean to prevent scratching the computer
cover.
NOTICE:
The disk drive is very sensitive to shock. Handle the assembly by its edges (do not
squeeze the top of the hard drive case), and avoid dropping it.
1. Follow the instructions in "
Preparing to Work Inside the Computer
."
2. Close the display, turn the computer upside down on a flat work surface, and remove the
battery.
3. Remove the M3 x 5-mm screw from the center of the hard drive door.
4. Slide the drive door up until the drive assembly tab disengages from the door slots in the
bottom case assembly.
5. Carefully pull the drive assembly straight out of the bottom case assembly.
Replacing the Hard Drive
1. Push the drive assembly into the hard drive opening on the left side of the computer.
2. Align the drive assembly tabs with the bottom case assembly slots and push down until it clicks
into place.
3. Replace the M3 x 5-mm screw in the drive door.
Fixed Optical Drive
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/V700/v700_SERVICE_MANUAL/hdd.htm (2 of 4)6/21/2004 2:50:59 AM