manualshive.com logo in svg

Dell Latitude LM, Руководство по обслуживанию, Страница: 34 / 87

Поделиться
Скачать
Dell Latitude LM Скачать руководство пользователя страница 34

Beep Codes and Error Messages

3-3

S

ystem Error Messages

The following table lists (in alphabetical order) system error messages that may 
appear on the display during the boot routine or during normal computer 
operation.

 

Table 3-2.  System Error Messages

Message

Definition

Probable Causes

Diskette drive A 
error

Connector loose or  dis-
kette faulty.

Faulty or incorrectly 
inserted diskette in 
drive. Faulty diskette 
drive. Faulty main 
board.

Extended RAM 
failed at off-
set: 

nnnn

Extended memory not 
configured properly or 
failed at memory 
address nnnn.

Faulty or improperly 
seated memory mod-
ule. Faulty main board.

Failing bits: 
nnnn 

Memory failed at RAM 
address nnnn.

Faulty or improperly 
seated memory mod-
ule. Faulty main board.

Fixed disk 0 
failure

Hard-disk drive not 
responding to 
commands from com-
puter.

Corrupted hard-disk 
drive boot sector or 
configuration file. 
Faulty hard-disk drive. 
Faulty main board.

Fixed disk con-
troller failure

Hard-disk drive or con-
troller not responding to 
commands from com-
puter.

Faulty hard-disk drive. 
Faulty main board.

Incorrect drive 
A type—run Setup

Diskette drive not iden-
tified properly in the 
Setup program. 

Incorrect drive 
configuration. Faulty 
connections. Faulty dis-
kette drive. Faulty 
main board.

Keyboard con-
troller error

Keyboard controller  
faulty.

Faulty keyboard 
connection. Faulty key-
board. Faulty main 
board. 

Содержание Latitude LM
























































































Отзывы:

Нет отзывов