support.dell.com
Dell Latitude L400 Service Manual
19
3. Pivot the memory module down until it clicks into place.
If you do not hear a click as each end of the memory module snaps into the
tabs, remove the memory module and reinstall it (see Figure 13).
Palmrest Assembly
Figure 14. Removing the Palmrest Assembly Bottom Screws
The palmrest assembly consists of the palmrest, status lights, and touch pad
assembly.
NOTICE: To avoid damaging the system board, you must remove the
main battery before you service the computer.
1.
Remove the keyboard bezel.
2. Remove the display assembly.
3. Remove the keyboard assembly.
4. Turn the computer upside down on a flat work surface.
5. Remove the six M2.6 x 1.6-mm screws located in the battery bay
(see Figure 14).
NOTICE: Make sure that the work surface is clean to prevent
scratching the computer cover.
6. Turn the computer right-side up.
M2.6 x 1.6-mm screws (6)