Installing the base cover
1.
Align the tabs on the base cover with the slots on the computer.
2.
Press the edges of the cover until it clicks into place.
3.
Tighten the screws to secure the base cover to the computer.
4.
After working inside your computer
.
Battery
Removing the battery
1.
Before working inside your computer
2.
.
3.
To remove the battery:
a. Disconnect the battery cable from the connector on the system board [1].
b. Remove the screws that secure the battery to the computer [2].
c. Lift the battery away from the computer [3].
10
Содержание Latitude E7270
Страница 1: ...Dell Latitude E7270 Owner s Manual Regulatory Model P26S Regulatory Type P26S001 ...
Страница 32: ...32 ...