Dell Latitude E5470 Скачать руководство пользователя страница 44

Страница: 44 / 63

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you restart

the system.

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

Enter

Selects a value in the selected field (if applicable) or follow the link in the field.

Spacebar

Expands or collapses a drop-down list, if applicable.

Tab

Moves to the next focus area.

Esc

Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.

System setup options

NOTE:

Depending on your system and its installed devices, the items that are listed in this section may or may not appear.

System Setup overview

System Setup allows you to:

●

Change the system configuration information after you add, change, or remove any hardware in your computer.

●

Set or change a user-selectable option such as the user password.

●

Read the current amount of memory or set the type of hard drive installed.

Before you use System Setup, it is recommended that you write down the System Setup screen information for future
reference.

CAUTION:

Unless you are an expert computer user, do not change the settings for this program. Certain

changes can cause your computer to work incorrectly.

Accessing System Setup

1. Turn on (or restart) your computer.
2. After the white Dell logo appears, press F2 immediately.

The System Setup page is displayed.

NOTE:

If you wait too long and the operating system logo appears, wait until you see the desktop. Then, shut down or

restart your computer and try again.

NOTE:

After the Dell logo appears, you can also press F12 and then select

BIOS setup

General screen options

This section lists the primary hardware features of your computer.

Option

Description

System
Information

●

System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.

●

Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels
Mode, Memory Technology, DIMM A Size, DIMM B Size.

BIOS setup

Содержание Latitude E5470
































































Результаты поиска

Содержание Latitude E5470

Отзывы:

Похожие инструкции для Latitude E5470

Бренды по названию

Популярные бренды

Dell Latitude E5470, Руководство пользователя

Результаты поиска

Содержание Latitude E5470

Отзывы:

Похожие инструкции для Latitude E5470

Бренды по названию

Популярные бренды