support.dell.com
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
29
7.
Connect the two-wire back-light plug to the connector on the inverter.
When the plug is all the way in the connector, the key slot in the center of
the plug should
not
be visible. If you can see the key slot, the plug is not in
the connector correctly. Pull the plug out, turn the plug over, and reinsert it
into the connector.
8. Reinstall the four 5-mm screws to secure the LCD panel to the top cover.
!,
"
1.
Remove the main battery and secondary battery (if present).
2. Remove the device from the modular bay (if present).
3. Remove the display assembly.
4. Remove the LCD panel.
5. Remove the display assembly bezel latch by unsnapping the latch and
captive spring from the inside of the display assembly top-cover assembly
(see Figure 14 and Figure 16).
