Dell Latitude CPi A, Руководство по обслуживанию

Страница: 9 / 51

2 Dell Latitude CPi A Service Manual
Most of the procedures in this manual require the use of one or more of the
following tools:
Number 0 and number 1 magnetized Phillips-head screwdrivers
Small flat-blade screwdriver
Small plastic scribe
Processor extractor
Before you start to work on the computer, perform the following steps:
1. Save any work in progress and close all open applications.
2. Turn off the computer and any attached peripherals.
NOTE: Make sure the computer is turned off and not in suspend-to-disk
mode. If you cannot shut down the computer using the computer’s operating
system, press the power button for 4 seconds.
3. If the computer is docked in a C/Dock Expansion Station or C/Port Advanced
Port Replicator (APR), undock the computer.
4. Disconnect the computer and any attached peripherals from AC power
sources to reduce the potential for personal injury or shock. Also disconnect
any telephone or telecommunications lines from the computer.
5. Remove the power cord.
6. Disconnect all other external cables from the computer.
7. Remove any installed PC Cards.
#$ $
%
8. Remove the main battery assembly from the battery bay.
Slide the battery bay latch away from the center of the computer. Then slide
the battery out of the battery bay (see Figure 2).