Dell Latitude 7480, Руководство пользователя, Страница: 24 / 84

3. To remove the LED board:
a. Disconnect the LED cable from the LED board [1].
CAUTION: Avoid pulling the cable as it would result in breaking the cable connector. Instead, use a scribe
to push the edges of the cable connector to release the LED cable.
b. Remove the M2.0 x 3.0 screw that secures the LED board to the computer [2].
c. Lift the LED board from the computer [3].
Installing LED board
1. Insert the LED board into the slot on the computer.
2. Tighten the M2.0 x 3.0 screw to secure the LED board.
3. Connect the LED cable to the system board.
4. Install the :
a. battery
b. base cover
5. Follow the procedure in After working inside your computer .
Smart card module
Removing smart card cage
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a. base cover
24 Disassembly and reassembly