Dell Latitude 7390 Скачать руководство пользователя страница 62

Страница: 62 / 82

Option

Description

Date/Time

Allows you to change the date and time.

Video screen options

Option

Description

LCD Brightness

Allows you to set the display brightness depending up on the power source (On Battery and On AC).

NOTE:

The video setting will be visible only when a video card is installed into the system.

Security screen options

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE:

You must set the admin password before you set the system or hard drive password. Deleting

the admin password automatically deletes the system password.

NOTE:

Password changes take effect immediately.

By default, the drive will not have a password set.

System
Password

Allows you to set, change or delete the system password.

NOTE:

Password changes take effect immediately.

By default, the drive will not have a password set.

Password
Configuration

Allows you to determine the minimum and maximum length of Administrator and System passwords.

Password Bypass

Allows you to disable or enable the permission to bypass the System and the Internal hard drive password,
when they are set. The options are:

●

Disabled

. This option is selected by default.

●

Reboot bypass

Password
Change

Allows you to enable or disable permission to the System and Hard Drive passwords when the admin
password is set.

Allow Non-Admin Password Changes

This option is selected by default.

UEFI Capsule
Firmware
Updates

This option controls whether the system allows BIOS updates via UEFI capsule update packages.

Enable UEFI Capsule Firmware Updates

option is selected by default.

NOTE:

Disabling this option will block BIOS updates from services such as Microsoft Windows

Update and Linux Vendor Firmware Service (LVFS).

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST.

You can control whether the trusted platform module is visible to the operating system. The option is:

●

TPM on

This option is selected by default.

●

Clear

●

PPI Bypass for Disable Commands

●

PPI Bypass for Clear Command" in TPM 2.0 Security

●

Attestation Enable

. This option is selected by default.

●

PPI Bypass for Disable Commands

●

Key Storage Enable

. This option is selected by default.

●

SHA-256

. This option is selected by default.

System setup

Содержание Latitude 7390



















































































Результаты поиска

Содержание Latitude 7390

Отзывы:

Похожие инструкции для Latitude 7390

Бренды по названию

Популярные бренды

Dell Latitude 7390, Руководство пользователя

Результаты поиска

Содержание Latitude 7390

Отзывы:

Похожие инструкции для Latitude 7390

Бренды по названию

Популярные бренды