Installing touchpad buttons board
1. Insert the touchpad buttons board into the slot to align the tabs with the grooves on the computer.
2. Tighten the M2.0 x 2.5 screws to secure the touchpad buttons board to the computer.
3. Connect the touchpad buttons board cable to the connector on the touchpad board.
4. Affix the smart card cable and connect it to the connector on the computer.
5. Install the
.
6. Connect the battery cable to the connector on the system board.
7. Install the
.
After working inside your computer
.
Display Assembly
Removing display assembly
Before working inside your computer
.
2. Remove the
.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the
.
5. Remove the
NOTE:
To identify the number of screws, see
6. To remove the display assembly:
Disassembly and reassembly
29