Dell Latitude 5591, Руководство по обслуживанию

Страница: 20 / 64

b battery
3 Disconnect the battery cable and remove the battery from the system board.
4 To remove the hard drive:
a Disconnect the hard drive cable from the connector on the system board [1].
NOTE: The system default configuration is SSD. The laptop shipped with HDD is
optional.
b Remove the M2x5 screws (4) that secure the hard drive to the system [2].
c Lift the hard drive away from the system [3].
Installing hard drive
1 Insert the hard drive into the slot on the system.
2 Replace the screws to secure the hard drive to the system.
3 Replace the hard drive cable.
4 Replace the screws to secure the hard drive assembly to the system.
5 Connect the hard drive cable to the connector on the system board.
6 If you have not removed the battery, you must connect the battery cable to the system board.
7 Install the :
a base cover
b battery
8 Follow the procedures in After working inside your system .
20 Disassembly and reassembly