Dell Latitude 5495 Скачать руководство пользователя страница 88

Страница: 88 / 93

Virtualization support screen options

Option

Description

AMD-V Technology

The option

Enable AMD-V Technology

is selected by default.

AMD-Vi Technology

The option

Enable AMD-Vi Technology

is selected by default.

Wireless screen options

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless switch. The options are:

•

WWAN

•

GPS on WWAN Module

•

WLAN

•

Bluetooth

All the options are enabled by default.

NOTE:

For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled or

disabled independently.

Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.

•

WWAN/GPS

•

WLAN

•

Bluetooth

All the options are enabled by default.

Maintenance screen options

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

BIOS Downgrade

This controls flashing of the system firmware to previous revisions.

•

Allows BIOS Downgrade (enabled by default)

Data Wipe

This field allows users to erase the data securely from all internal storage devices. The following is list of devices
affected. The option Start Data wipe is not selected by default.

BIOS Recovery

This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard
drive or an external USB key.

•

BIOS Recovery from Hard Drive (enabled by default)

•

BIOS Auto-Recovery

•

Always perform Integrity Check

System setup options

Содержание Latitude 5495






























































































Результаты поиска

Содержание Latitude 5495

Отзывы:

Бренды по названию

Популярные бренды

Dell Latitude 5495, Руководство пользователя

Результаты поиска

Содержание Latitude 5495

Отзывы:

Бренды по названию

Популярные бренды