Dell Latitude 5495 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 93

background image

Option

Description

•

Processor Information: Displays Processor Type, Core Count, Processor ID, Microcode Version, Current Clock

Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache,

Simultaneous Multi-Threading Capable, and 64-Bit Technology.

•

Device Information: Displays Primary Hard Drive, MiniCard SSD Device, LOM MAC Address, Audio controller,

Wi-fi Device, Cellular Device, Bluetooth Device.

•

Video Device Information: Video controller, video BIOS version, Video Memory, Panel type, and Native

Resolution

Battery Information

Displays the battery status and health of the battery connected to the computer.

Date/Time

Allows you to change the date and time.

Boot Sequence

Allows you to change the order in which the computer attempts to find an operating system.

•

Diskette Drive

•

Internal HDD

•

USB Storage Device

•

CD/DVD/CD-RW Drive

•

Onboard NIC

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the

Enable Legacy Option ROMs

is disabled.

BIOS Setup
Advanced mode

This option enables you to select the "BIOS Setup Advanced mode" option

System Configuration screen options

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options are:

•

Disabled

•

Enabled

•

Enabled with PXE

: This option is enabled by default.

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

•

Disabled

•

AHCI

: This option is enabled by default.

Drives

Allows you to configure the drives on board. All drives are enabled by default. The options are:

•

SATA

(default)

•

M.2 PCIe SSD

(default)

SMART Reporting

This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.

•

Enable SMART Reporting

USB Configuration

This is an optional feature.

This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).

82

System setup options

«
...
80
81
82
83
84
...
»

Содержание Latitude 5495






























































































Отзывы:

Нет отзывов

Похожие инструкции для Latitude 5495

Aspire 1670 Series

Бренд: Acer Страницы: 118

Бренд: Acer Страницы: 94

AcerNote Nuovo 970

Бренд: Acer Страницы: 4

Бренд: Acer Страницы: 16

9410-2829 - Aspire

Бренд: Acer Страницы: 108

Бренд: Acer Страницы: 130

Бренд: Acer Страницы: 93

Aspire 1360 Series

Бренд: Acer Страницы: 104

Бренд: IBM Страницы: 4

Бренд: IBM Страницы: 189

Бренд: IBM Страницы: 4

Бренд: IBM Страницы: 6

Бренд: IBM Страницы: 5

Бренд: IBM Страницы: 6

Бренд: IBM Страницы: 3

Бренд: IBM Страницы: 116

Бренд: IBM Страницы: 10

Бренд: IBM Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды