Dell Latitude 5490, Руководство по обслуживанию

Страница: 31 / 105

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x2.5) to secure the solid-state drive to the system board.
Next steps
1. Install the system-board shield .
2. Install the back cover .
3. Install the cable cover (optional).
4. Install the stand .
5. Follow the procedure in After working inside your computer .
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the cable cover (optional).
4. Remove the back cover .
5. Remove the system-board shield .
About this task
The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal
procedure.
Removing and installing components 31