Dell Latitude 5424 Rugged Скачать руководство пользователя страница 16

Страница: 16 / 169

Enabling the Function (Fn) lock

1. Press the Fn+Esc keys.

NOTE:

Other secondary function keys on the top row are not affected and requires the use of the Fn key.

2. Press the Fn+Esc keys again to deactivate the function lock feature.

The function keys return to the default actions.

Enabling and disabling the wireless (WiFi) feature

1. To enable wireless Networking, press Fn + PrtScr.
2. Press Fn + PrtScr again to disable wireless Networking.

Hot key definition

Fn behavior: Primary behavior is media key; Secondary behavior is F1-F12 key.

●

Fn Lock only switches primary and secondary behavior on F1-F12.

●

F7 is stealth –unique for rugged and semi rugged platforms. It turns off LCD, all wireless, all alerts, indicator lights, sound,
fan, etc

Table 1. Keyboard shortcuts

Hot keys

Function

Description

Fn+ESC

Fn Lock

Allows the user to toggle between

locked

and

unlocked

Fn keys.

Fn+F1

Audio Volume Mute

Temporarily mutes/unmutes the
audio. The audio level before
muting is returned after unmuting.

Fn+F2

Audio Volume Down/Decrease

Decreases the audio volume until
minimum/off is reached.

Fn+F3

Audio Volume Up/Increase

Increases the audio volume until
maximum is reached.

Fn+F4

Microphone Mute

Silences the on-board microphone
so it cannot record audio. There
is an LED on the F4 function key
that notifies the user of the state
of this feature:

●

LED off = microphone capable
of recording audio

●

LED on = microphone muted
and unable to record audio

Technology and components

Содержание Latitude 5424 Rugged










































































































































































Результаты поиска

Содержание Latitude 5424 Rugged

Отзывы:

Похожие инструкции для Latitude 5424 Rugged

Бренды по названию

Популярные бренды

Dell Latitude 5424 Rugged, Руководство по обслуживанию

Результаты поиска

Содержание Latitude 5424 Rugged

Отзывы:

Похожие инструкции для Latitude 5424 Rugged

Бренды по названию

Популярные бренды