Dell Latitude 5401, Руководство по обслуживанию, Страница: 90 / 122

2. Install the memory module .
3. Install the heat sink - discrete or UMA (based on configuration).
4. Install the system fan .
5. Install the WLAN card .
6. Install the M.2 2230 solid-state drive .
7. Install the M.2 2280 solid-state drive .
8. Install the battery .
9. Install the base cover .
10. Follow the procedure in after working inside your computer .
Randmetoe ja klaviatuurisõlm
Removing the palm-rest and keyboard assembly - UMA
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Remove the battery ( 3-cell or 4-cell ).
4. Remove the WLAN card .
5. Remove the memory module .
6. Remove the M.2 2280 SSD .
7. Remove the M.2 2230 SSD .
8. Remove the system fan .
9. Remove the speaker ( 3-cell battery configuration or 4-cell battery configuration ).
10. Remove the heat sink .
11. Remove the coin-cell battery .
12. Remove the I/O board .
13. Remove the power button with fingerprint reader .
14. Remove the DC-in port .
15. Remove the touchpad .
16. Remove the display assembly .
17. Remove the system board .
NOTE: The system board can be removed along with the heat sink.
About this task
The figure indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the removal procedure.
90 Lahtivõtmine ja kokkupanek