Dell Latitude 5320, Руководство по обслуживанию

Страница: 98 / 116

Connection options
Table 7. Connection
Option Description
Wireless Device Enable
WWAN/GPS Allows you to enable or disable the internal WWAN/GPS device.
WWAN Bus Mode - Allows you to set the interface type of the
wireless WAN card.
The options are:
Bus Mode PCIe - This option is recommended for Microsoft
Windows users.
Bus Mode USB
WLAN Allows you to enable or disable the internal WLAN device.
Bluetooth Allows you to enable or disable the internal Bluetooth device.
Contactless
smartcard/NFC Allows you to enable or disable the internal Near Field Computing
device.
Enable UEFI Network Stack
It allows pre-OS and early operating system networking features to use any enabled NICs
when UEFI networking protocols are installed and available. This can be used without PXE
turned on.
Enable UEFI Network Stack - This option is enabled by default.
Wireless Radio Control
This feature senses the connection of the system to a wired network and disables the
selected wireless radios (WLAN and/or WWAN).
The options are:
● Control WLAN radio - This option is disabled by default.
● Control WWAN radio - This option is disabled by default.
NOTE: Checking Control WLAN radio can result in loss of dock connectivity when the
system is docked over WiGig while also connected over a wired network.
HTTPs Boot Failure
Allows you to enable or disable HTTPs Boot feature.
HTTPs Boot - This option is enabled by default.
Power management
Table 8. Power Management
Option Description
Battery Configuration
Allows the system to run on battery during peak power usage hours.
The options are:
● Adaptive —This option is enabled by default.
● Standard
● ExpressCharge
● Primarily AC Use
● Custom
NOTE: If Custom Charge is selected, you can also configure Custom Charge Start and
Custom Charge Stop.
Advanced Configuration
This option enables you to maximize the battery health.
By default, the Enable Advanced Battery Charge Mode option is disabled.
98 System setup