Next steps
1. Replace the
2. Replace the
3. Replace the
4. Replace the
5. Replace the
6. Follow the procedure in
after working inside your computer
.
Emaplaat
Removing the system board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
5. Remove the
6. Remove the
7. Remove the
8. Remove the
9. Remove the
10. Remove the
11. Remove the
12. Remove the
13. Disconnect the :
•
•
Steps
1.
NOTE:
The system board can be removed and installed with the heat sink attached. This simplifies the procedure and
avoids breaking the thermal bond between system board and the heat sink.
Remove the three (M2x3) screws [1] that secures the memory module frame to the system board.
2. Remove the memory module frame away from the computer [2].
Komponentide eemaldamine ja paigaldamine
59
Содержание Latitude 5300 2-in-1 Chrome
