
a Remove the single (M2x3) screw that secures the WWAN card bracket [1].
b Remove the metal bracket away from the system [2].
c Disconnect the WWAN antenna cables from the connectors on the WWAN card [3].
d Slide and lift the WWAN card from the system [4].
Installing the WWAN card
1
Insert the WWAN card into the slot on the system.
2
Connect the WWAN antenna cables to the connectors on the WWAN card.
3
Replace the screw to secure the WWAN card to the computer.
4
Install the :
a
b
5
Follow the procedure in
After working inside your computer
.
Memory modules
Removing the memory module
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
b
Removing and installing components
19
Содержание Latitude 5290
Страница 1: ...Latitude 5290 Owner s Manual Regulatory Model P27S Regulatory Type P27S002 ...
Страница 23: ...Removing and installing components 23 ...
Страница 85: ...Video driver Verify if the video driver is already installed in the system Software 85 ...
Страница 88: ...Image device driver Verify if the image device driver is installed in the system 88 Software ...