Hard drive
Removing hard drive
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
b
3
To remove the hard drive:
a Disconnect the hard drive cable from the connector on the system board [1].
b Remove the 4 (M2 x 5.4) screws that secure the hard drive assembly to the system [2].
c Remove the hard drive assembly from the system.
d Remove the hard drive cable.
e Remove the 4 (M3x3) screws that secure the hard drive brackets in place.
f
Lift the hard drive bracket from the hard drive.
Installing hard drive
1
Insert the hard drive into the hard drive bracket.
2
Replace the screws to secure the hard drive bracket to the hard drive.
14
Removing and installing components
Содержание Latitude 5290
Страница 1: ...Latitude 5290 Owner s Manual Regulatory Model P27S Regulatory Type P27S002 ...
Страница 23: ...Removing and installing components 23 ...
Страница 85: ...Video driver Verify if the video driver is already installed in the system Software 85 ...
Страница 88: ...Image device driver Verify if the image device driver is installed in the system 88 Software ...