manualshive.com logo in svg

Dell Latitude 3540, Руководство по обслуживанию

Поделиться
Скачать
Dell Latitude 3540 Скачать руководство пользователя страница 9

Transporting sensitive components

When transporting ESD sensitive components such as replacement parts or parts to be returned to Dell, it is critical to place these parts in 
anti-static bags for safe transport.

Lifting equipment 

Adhere to the following guidelines when lifting heavy weight equipment:

CAUTION: 

Do not lift greater than 50 pounds. Always obtain additional resources or use a mechanical lifting device.

1

Get a firm balanced footing. Keep your feet apart for a stable base, and point your toes out. 

2

Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force of the load.

3

Lift with your legs, not your back.

4

Keep the load close. The closer it is to your spine, the less force it exerts on your back.

5

Keep your back upright, whether lifting or setting down the load. Do not add the weight of your body to the load. Avoid twisting your 

body and back.

6

Follow the same techniques in reverse to set the load down.

After working inside your computer

About this task

After you complete any replacement procedure, ensure that you connect any external devices, cards, and cables before turning on your 
computer.

Steps

1 

Connect any telephone or network cables to your computer.

CAUTION: 

To connect a network cable, first plug the cable into the network device and then plug it into the 

computer.

2 

Connect your computer and all attached devices to their electrical outlets.

3 

Turn on your computer.

4 

If required, verify that the computer works correctly by running 

ePSA diagnostics

.

Working on your computer

9

Содержание Latitude 3540





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды