Option
Description
•
Enable Attempt Legacy Boot
BootUEFI Boot
Path
SecurityOptions
Allows you to control whether or not the system will prompt to the user to enter the Admin password, when a user
selects a UEFI boot path from the F12 boot Menu.
•
Always, Except Internal HDD
(The option is enabled by default)
•
Always
•
Never
NOTE:
These options have no relevance if the Admin password is not set BIOS settings.
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
Disabled
•
AHCI:
This option is enabled by default.
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
SATA-0
•
SATA-1
SMART Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
Enable SMART Reporting
USB Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
Enable USB Boot Support (by default enable)
•
Enable External USB Port (by default enable)
USB PowerShare
This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using
the stored system battery power through the USB PowerShare port.
Audio
This field enables or disables the integrated audio controller. By default, the
Enable Audio
option is selected. The
options are:
•
Enable Microphone (by default enable)
•
Enable Internal Speaker (by default enable)
74
System Setup