Installing the base cover
1
Align the edges of the base cover with the laptop and press until it clicks into place.
2
Tighten the screws to secure the base cover to the laptop.
3
Follow the procedure in
After working inside your computer
.
Battery
Removing the battery
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
NOTE:
Ensure to pull the battery connector from the connector by the head of the connector label, to avoid damage
to the PIN.
b Remove the screws (4) that secure the battery to the laptop [2].
c Lift the battery away from the laptop [3].
Removing and installing components
11
