Installing the system board
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of system board and provides a visual representation of the installation procedure.
1
Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system
board with the screw holes on the palm-rest and keyboard assembly.
2
Connect the display cable on to the connector on the system board6
3
Connect the power-adapter port cable to the system board.
4
Connect the coin-cell battery cable to the system board.
5
Connect the keyboard backlit cable to the system board and close the latch to secure the cable.
6
Connect the keyboard cable to the system board and close the latch to secure the cable.
7
Connect the touchpad cable to the system board and close the latch to secure the cable.
8
Connect the fingerprint-reader cable to the system board and close the latch to secure the cable.
9
Connect the speaker cable to the system board.
Removing and installing components
49