1
Align and place the palm-rest and keyboard assembly on the display assembly.
2
Using the alignment posts, close the display hinges.
3
Replace the two screws (M2.5x3.5) that secures the left display hinge to the I/O board and palm-rest and keyboard assembly.
4
Replace the screw (M2x4) that secures the right display hinge to the system board.
5
Connect the display cable on to the connector on the system board
6
Align and place the display-cable bracket on the display cable.
7
Replace the screw (M2x4) that secures the display-cable bracket to the system board.
1
Install the
.
2
Install the
.
3
Follow the procedure in
After working inside your computer
I/O board
Removing and installing components
41
