Installing display assembly
1
Place the display assembly to align with the screw holders on the computer.
2
Replace the screws that secure the display hinges to the palm-rest assembly.
3
Flip over the computer.
4
Connect the display cable to the connector on the system board.
5
Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the
computer.
6
Connect the WLAN cables.
7
Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board.
8
Install the:
a
b
c
9
Follow the procedure in
After working inside your computer
.
Display bezel
Removing display bezel
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
Remove the hinge cap and the mylar cap that secures the display bezel to the display assembly [1,2].
Removing and installing components
23
