7
Follow the procedure in
After working inside your computer
.
Heat sink
Removing heat sink
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the heat sink:
a Place the back side of system on a flat surface.
b Locate the heat sink.
c Remove the screws (4) securing the heat sink on the system board [1].
d Lift the heat sink from the outlet connected on the heat sink fan and the system board [2].
NOTE:
SSD card is below heat sink. To upgrade or replace SSD card, ensure to remove the heat sink.
CAUTION:
When in use, the surface of the heat sink is hot. Ensure to lift the heat sink cautiously.
CAUTION:
DO NOT bend or damage the copper heat sink tunnel. Any damage results in malfunction and
over heating of the tablet.
Installing heat sink
1
Align the heat sink on the system board.
Removing and installing components
33
