
Enabling Computrace
1. Turn on (or restart) your computer.
2. When the DELL logo appears, press <F12> immediately.
NOTE:
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop;
then, shut down your computer and try again.
3. Select
Security
tab and then select
Computrace(R)
.
4. Select
Activate
to enable or
Deactivate
to disable the Computrace option.
NOTE:
Once you enable or disable the Computrace option in the BIOS settings, you will be unable to change this setting in future. This is to
prevent from somebody else enabling or disabling this option.
NOTE:
You will need to install the Computrace software in Windows for the software to protect your computer.
Related Information
Содержание Inspiron Inspiron 17R
