Dell Inspiron 8000 Скачать руководство пользователя страница 5

Страница: 5 / 105

Power Conservation : Dell Inspiron 8000

●

Press the power button or the power conservation key combination, <Fn><Suspend>, that you

programmed (via the

Advanced

tab).

HINT:

You can use the

Advanced

tab to program the display-close option, the power button,

and the power conservation key combination to activate standby mode.

To exit standby mode, press the power button, or if you activated standby mode by closing the

display, open (raise) the display.

Hibernate Mode

Hibernate mode conserves power by copying system data to a reserved area on the hard drive and

then completely turning off the computer. When you exit hibernate mode, the application programs

and files that were open before you activated hibernate mode are still open.

Your computer enters hibernate mode if the battery charge level becomes critically low, or if either the

power button, the power conservation key combination, <Fn><Suspend>, or the display-close option

are programmed to activate hibernate mode in the

Advanced

tab of the

Power Options Properties

window.

HINT:

Some PC Cards may not operate correctly after resuming operation from hibernate

mode. If you encounter problems with a PC Card, reinsert the card or restart your computer.

To exit hibernate mode, press the power button. The computer may take a short time to return to its

normal operating state. Pressing a key or touching the touch pad or track stick does not bring the

computer out of hibernate mode.

Hibernate mode requires a special file on your hard drive with enough disk space to store the contents

of the computer memory. Dell creates an appropriately sized hibernate mode file before shipping the

computer to you.

If you reinstall the operating system, you must reenable

hibernate support

Power Options Properties

To access the Microsoft® Windows®

Power Options Properties

window:

1. Click the

Start

button, point to

Settings

, and click

Control Panel

2. Double-click the

Power Options

icon.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...%20ok/Inspiron/8000/8000_SERVICE_MAN/power.htm (2 of 4)6/21/2004 1:07:20 AM

Содержание Inspiron 8000










































































































Результаты поиска

Содержание Inspiron 8000

Отзывы:

Похожие инструкции для Inspiron 8000

Бренды по названию

Популярные бренды

Dell Inspiron 8000, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 8000

Отзывы:

Похожие инструкции для Inspiron 8000

Бренды по названию

Популярные бренды