Replacing the touchpad
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Procedure
1
Align the screw holes on the touch pad with the screw holes on the palm-rest assembly.
2
Replace the four screws (M2x2) that secure the touch pad to the palm-rest assembly.
3
Adhere the tapes that secure the touch-pad assembly to the palm-rest assembly.
4
Slide the touch-pad cable into the connector on the touch-pad assembly and close the latches to secure the cable.
5
Align the screw holes touch-pad bracket with the screw holes on the palm-rest assembly.
6
Replace the three screws (M2x2) that secure the touch-pad bracket to the palm-rest assembly.
Post-requisites
1
Replace the
.
2
Replace the
.
37
58
Replacing the touchpad
Содержание Inspiron 7786
