background image

56

  |  Replacing 

the 

Display 

Assembly

Replacing the Display Assembly

 

WARNING:  Before working inside your computer, read the safety information 
that shipped with your computer and follow the steps in "Before Working Inside 
Your Computer" on page 7. After work
ing inside your computer, follow the 
instructions in "After Working Inside Your Computer" on page 9. For more 
safety best practices, see the Regulatory Compliance home page at 

 

dell.com/regulatory_compliance.

Procedure

1

Place the palm-rest assembly on the display assembly.

2

Align the screw holes on the palm-rest assembly with the screw holes on the 
display hinges and pressing down on the display hinges, close the palm-rest 
assembly.

3

Replace the screws that secure the display hinges to the palm-rest assembly.

4

Route the camera and antenna cables through the routing guides on the palm-rest 
assembly.

5

Replace the system-board assembly on the computer base.

6

Replace the screw that secures the system-board assembly on the computer base.

7

Connect the camera cable to the system board.

8

Connect the power-adapter port cable to the system board.

9

Connect the hard-drive cable to the system board.

10

Connect the speaker cable to the system board.

11

Slide the USB-board cable to the connector latch and connect it to the system 
board by snapping it in place.

12

Adhere the tape to the USB-board cable.

13

Connect the display cable to the system board.

Postrequisites

1

Replace the wireless minicard assembly. See "Replacing the Wireless Card" on 
page 33.

2

Replace the base cover. See "Replacing the Base Cover" on page 29. 

3

Replace the keyboard. See "Replacing the Keyboard" on page 26.

4

Replace the hard-drive assembly. See "Replacing the Hard Drive" on page 21.

5

Replace the optical-drive assembly. See "Replacing the Optical Drive" on page 18.

6

Replace the battery. See "Replacing the Battery" on page 12.

book.book  Page 56  Friday, August 16, 2013  4:21 PM

Содержание Inspiron 7737 7000 Series





























































Отзывы: