Installing the M.2 SSD module
1
Place the SSD in its slot.
2
Replace the M2.0x3.0 screw to secure the SSD to the computer.
3
Place the thermal plate on the SSD.
4
Replace the M2.0x3.0 screw to secure the thermal plate to the computer.
5
Install the:
a
b
c
6
Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing the coin cell battery
1
Follow the procedures in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove coin cell battery:
a Disconnect the coin cell battery cable from the computer [1].
b Pry and lift the coin cell battery from the computer [2].
22
Disassembly and reassembly