Dell Inspiron 7415 2-in-1, Руководство по обслуживанию

Страница: 34 / 73

3. Note the speaker cable routing, and remove the speaker cable from the routing guides on the palm-rest and keyboard
assembly.
4. Lift the speakers along with the cables, off the palm-rest and keyboard assembly.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Using the alignment posts and rubber grommets, place the speakers on the slots of the palm-rest and keyboard assembly.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
4. Connect the speaker cable to the system board.
Next steps
1. Install the battery
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
Heat sink
Removing the heat sink
Prerequisites
1. Follow the procedure in Before working inside your computer .
34 Removing and installing components