Dell Inspiron 7400 Скачать руководство пользователя страница 99

Страница: 99 / 112

Performance

Table 9. Performance

Option

Description

Multi Core Support

This field specifies whether the process has one or all cores
enabled. The performance of some applications improves with
the additional cores.

●

All

—Default

●

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep mode of
processor.

●

Enable Intel SpeedStep

This option is set by default.

C-States Control

Allows you to enable or disable the additional processor sleep
states.

●

C states

This option is set by default.

Intel® TurboBoost™

This option enables or disables the Intel® TurboBoost™ mode
of the processor

Hyper-Thread Control

Allows you to enable or disable the HyperThreading in the
processor.

●

Disabled

●

Enabled

—Default

Power management

Table 10. Power Management

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter
is connected.

●

Wake on AC

This option is not set by default.

Enable Intel Speed Shift
technology

This option is used to enable/disable Intel Speed Shift Technology.

This option is not set by default.

Auto On Time

Allows you to set the time at which the computer must turn on automatically.

The options are:

●

Disabled

—Default

●

Every Day

●

Weekdays

●

Select Days

This option is not set by default.

USB Wake Support

Allows you to enable USB devices to wake the system from standby.

System setup

Содержание Inspiron 7400

















































































































Результаты поиска

Содержание Inspiron 7400

Отзывы:

Dell Inspiron 7400, Руководство по обслуживанию, Страница: 99 / 112

Результаты поиска

Содержание Inspiron 7400

Отзывы: