Removing the base cover
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Procedure
1. Loosen the three captive screws that secure the base cover to the palm-rest assembly.
2. Remove the four screws (M2x5) that secure the base cover to the palm-rest assembly.
3. Using a plastic scribe, pry the base cover from the tabs on the hinges and continue to pry the base cover from the slots on
the palm-rest assembly.
CAUTION:
Do not pry the base cover from the middle as it might damage the chassis.
4. Carefully remove the base cover off the palm-rest assembly.
6
Removing the base cover
15
Содержание Inspiron 7386
