manualshive.com logo in svg

Dell Inspiron 7300 2n1 Black, Руководство по обслуживанию, Страница: 19 / 66

Поделиться
Скачать
Dell Inspiron 7300 2n1 Black Скачать руководство пользователя страница 19

About this task

NOTE:

 This procedure applies only to computers shipped with a M.2 2280 solid-state drive or a M.2 2280 Intel Optane

H10 installed.

NOTE:

 The M.2 card installed on your computer will depend on the configuration ordered. Supported card

configurations on the M.2 card slot:

• M.2 2230 solid-state drive + 2230 mounting bracket
• M.2 2280 solid-state drive
• M.2 2280 Intel Optane Memory H10

The following image(s) indicate the location of the M.2 2280 solid-state drive/Intel Optane H10 and provides a visual representation of the
removal procedure.

Steps

1. Remove the screw (M2x2) that secures the M.2 2280 solid-state drive/Intel Optane to the system board.
2. Slide and remove the M.2 2280 solid-state drive/Intel Optane from the M.2 card slot on the system board.

Installing the M.2 2280 solid-state drive/Intel Optane H10

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

NOTE:

 This procedure applies if you are installing a M.2 2280 solid-state drive or M.2 2280 Intel Optane H10.

NOTE:

 The M.2 card installed on your computer will depend on the configuration ordered. Supported card

configurations on the M.2 card slot:

• M.2 2230 solid-state drive + 2230 mounting bracket

Removing and installing components

19

Содержание Inspiron 7300 2n1 Black



































































Отзывы:

Нет отзывов