manualshive.com logo in svg

Dell Inspiron 5590, Руководство пользователя

Поделиться
Скачать
Dell Inspiron 5590 Скачать руководство пользователя страница 91

Option

Description

Warnings and Error

This option will cause the boot process to only pause when warnings or errors are detected.

•

Prompt on Warnings and Errors This option is enabled by default.

•

Continue on Warnings

•

Continue on Warnings and Errors

NOTE: 

Error deemed critical to the operation of the system hardware will always halt the system.

Virtualization support screen options

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology: This option is enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided 
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O: This option is enabled by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware 
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and Virtualization 
technology for direct I/O must be enabled to use this feature.
Trusted Execution: This option is enabled by default.

Wireless screen options

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless switch. The options are:

•

WWAN

•

GPS (on WWAN Module)

•

WLAN/WiGig

•

Bluetooth

All the options are enabled by default.

NOTE: 

For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled or 

disabled independently.

Wireless Device 
Enable

Allows you to enable or disable the internal wireless devices.

•

WWAN/GPS

•

WLAN/WiGig

•

Bluetooth

All the options are enabled by default.

System setup options

91

Содержание Inspiron 5590




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды