background image

GUID-D6AEB812-9962-40E9-BCC1-7396857077F1

Hard drive options

This laptop supports HDD, M.2 SATA SSD, and M.2 PVIe NVMe.

GUID-B85F720D-DA0F-4DC7-9CDB-138ADA248A5A

Identifying the hard drive in Windows 10

Tap or click 

All Settings

 

 on the Windows 10 Charms Bar.

Tap or click 

Control Panel

, select 

Device Manager

 , and expand 

Disk drives

.

The hard drive is listed under 

Disk drives

GUID-8EDF4132-07F1-438E-A080-D48FE8DF49ED

Identifying the hard drive in the BIOS

Turn on or restart your laptop.

When the Dell logo appears, perform one of the following actions to enter the BIOS setup program:

With keyboard — Tap F2 until the Entering BIOS setup message appears. To enter the Boot selection menu, tap F12.

Without keyboard — When the 

F12 boot selection

 menu is displayed, press the Volume Down button to enter BIOS setup. To 

enter the Boot selection menu, press the Volume Up button.

The hard drive is listed under the 

System Information

 under the 

General

 group. 

GUID-DA1C05F6-9DF5-434A-B510-A13DD61EB45A

Camera features

This laptop is shipped with front-facing camera with the image resolution of 1280 x 720 (maximum).

NOTE: 

The camera is at the top center of the display.

Technology and components

69

Проконсультироваться

 

и

 

купить

 

данное

 

оборудование

 

вы

 

можете

 

в

 

компании

 «

АНД

-

Системс

»  

адрес

: 125480, 

г

.

Москва

ул

.

Туристская

д

.33/1; site: https://andpro.ru 

тел

: +7 (495) 545-4870 email: [email protected] 

 

При

 

обращении

 

используйте

 

промокод

 AND-PDF 

и

 

получите

 

скидку

Содержание Inspiron 5580









































































































Отзывы: