4
To remove the chassis frame:
a Remove the five (M2x3) screws and eight (M2x5) screws that secure the chassis frame to the system [1].
b Lift the chassis frame from the system [2].
Installing the chassis frame
1
Place the chassis frame into the slot on the system.
NOTE:
Gently pull the keyboard cable and keyboard back light cables through the spacing in the chassis frame before
placing the chassis frame in the slot on the system.
2
Replace the five (M2x3) screws and eight (M2x5) screws to secure the chassis frame to the system.
3
Connect the keyboard cable and the keyboard backlight cable to their connectors on the system.
NOTE:
There may be more than one cable to connect based on keyboard types.
4
Route the WLAN and WWAN (optional) cables through the routing channels.
5
Install the:
a
b
c
d
e
f
g
6
Follow the procedure in
After working inside your system
Disassembly and reassembly
35
