5
Affix the adhesive tape of the display cable to the power connector bracket and replace the M2x3 screw to secure another end of the
power connector bracket.
6
Install the :
a
b
7
Follow the procedure in
After working inside your computer
.
Chassis frame
Removing the chassis frame
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
f
g
NOTE:
There are two different screw sizes for chassis frame: M2x5 8ea and M2x3 5ea
3
To release the chassis frame:
a Unroute the WLAN and WWAN cables from the routing channels [1].
b Lift the latch and disconnect the keyboard backlight cable and the keyboard cable from their connectors [2] on the system.
NOTE:
There may be more than one cable to disconnect based on the keyboard type.
34
Disassembly and reassembly
