Replacing the memory modules
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Procedure
1. Lift the flap from the memory module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
NOTE:
The number of memory modules may vary with the configuration that you ordered.
3. Slide the memory module firmly into the slot at an angle.
4. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Post-requisites
11
24
Replacing the memory modules
Содержание Inspiron 5485
