Steps
1. Align and place the power-button board on the palm-rest assembly.
2. Replace the two (M2x2.5) screws that secure the power-button board to the palm-rest assembly.
Next steps
1. Install the
.
NOTE:
The system board can be installed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
2. Install the
.
3. Install the heat sink -
or
based on the system configuration.
4. Install the
.
5. Install the
6. Install the
.
7. Install the
.
8. Install the
.
9. Install the
.
10. Install the
11. Install the
.
12. Exit
.
After working inside your computer
.
Smart card reader
Removing the smart card reader
Prerequisites
Before working inside your computer
.
2. Enter
.
58
Removing and installing components
Содержание Inspiron 5421
