Steps
1. Align the notch on the 2280 solid-state drive with the tab on M.2 slot one on the system board.
2. Slide the 2280 solid-state drive into M.2 slot one on the system board.
3. Replace the screw (M2x3) that secures the 2280 solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
After working inside your computer
.
Installing the solid-state drive mounting bracket on M.2 slot one
About this task
The following image provides a visual representation of the procedure to install the solid-state drive mounting bracket when
replacing M.2 2230 solid-state drive with M.2 2280 solid-state drive in M.2 slot one.
NOTE:
If there is only one solid-state drive in the configuration you ordered, you may install another solid-state drive in the
other M.2 slot. However, you need a solid-state drive bracket (sold separately) to install the additional solid-state drive.
Removing and installing components
25
