Dell Inspiron 5391 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 81

Dell Inspiron 5391 Скачать руководство пользователя страница 40

4. Open the latch and disconnect the I/O-board cable from the I/O board.
5. Remove the screw (M2.5x2.5) that secures the I/O board to the palm-rest and keyboard assembly.
6. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
7. Lift the I/O board off the palm-rest and keyboard assembly.

Installing the I/O board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of I/O board and provides a visual representation of the installation procedure.

Steps

1. Align and place the I/O board on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
3. Replace the screw (M2.5x2.5) that secures the I/O board to the palm-rest and keyboard assembly.
4. Connect the I/O-board cable to the I/O board and close the latch to secure the cable.

40

Removing and installing components

«
...
38
39
40
41
42
...
»

Содержание Inspiron 5391


















































































Отзывы:

Нет отзывов