Dell Inspiron 3700 Скачать руководство пользователя страница 147

Страница: 147 / 185

Microprocessor

displays the type and speed of the microprocessor installed on your computer's system board. No user-selectable settings are

available for this option.

Num Lock

determines if the system boots with the Num Lock enabled or disabled when an external keyboard is attached.

Settings for this option are:

Disabled

(the default)

Enabled

A change to the

Num Lock

option has no effect when the system is booted unless an external keyboard is attached.

Parallel Mode

controls whether the computer's integrated parallel port acts as a Personal System/2 (PS/2)-compatible (

Bidirectional

) port,

Advanced Technology (AT)-compatible (

Normal

) port, or Extended Capabilities Port (

ECP

)-compatible port. The default for

Parallel Mode

ECP

Microsoft

Windows

98 uses ECP protocol automatically if it detects an ECP-compatible device.

Set this option according to the type of peripheral device connected to the parallel port. To determine the correct mode to use, see the
documentation that came with the device.

Setting

Parallel Mode

Disabled

disables the parallel port and its assigned LPT address, freeing its interrupt for another device to use.

For a change in the

Parallel Mode

option to take effect, you must reboot your computer.

Pointing Device

enables and disables the computer's touch pad and track stick.

Settings for this option are:

Touch Pad-PS/2 Mouse

(the default)

Serial Mouse

—

Disables the touch pad and track stick and allows you to use a mouse connected to the serial connector on the I/O port

If you want to use a serial mouse, you must first set the

Pointing Device

option to

Serial Mouse

For a change in the

Pointing Device

option to take effect, you must reboot your computer.

Power Management

allows you to enable or disable power conservation features when the computer is being powered by a battery or AC power.

When this option is disabled, the related power management functions are not visible.

If you want to use any of the time-out options while using battery power, set the

Battery

option to

Enabled

. If you want to use the time-out options

while using AC power, the set the

option to

Enabled

A change to the

Power Management

option takes effect immediately (rebooting is not required).

Primary Password

NOTE: The

ECP

setting also works for most software written for the AT and PS/2 modes. Devices that use

ECP

mode may come with

special drivers that need to be installed in order to use these modes.

NOTE: With systems running under ACPI, power management settings are controlled from the

Power Management Properties

window

in the

Control Panel

Содержание Inspiron 3700


























































































































































































Результаты поиска

Содержание Inspiron 3700

Отзывы:

Бренды по названию

Популярные бренды

Dell Inspiron 3700, Справочное руководство

Результаты поиска

Содержание Inspiron 3700

Отзывы:

Бренды по названию

Популярные бренды