Dell Inspiron 3520, Руководство пользователя

Страница: 85 / 104

General screen options
This section lists the primary hardware features of your computer.
Option Description
System
Information This section lists the primary hardware features of your computer.
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels
Mode, Memory Technology, DIMM ASize, DIMM B Size,
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed,
Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable,
and 64-Bit Technology.
● Device Information: Displays Primary Hard Drive, M.2 SATA2, M.2 SATA, M.2 PCIe SSD-0, LOM MAC
Address, Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio
Controller, Wi-Fi Device, WiGig Device, Cellular Device, Bluetooth Device.
Battery
Information Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence Allows you to change the order in which the computer attempts to find an operating system.
● Diskette Drive
● Internal HDD
● USB Storage Device
● CD/DVD/CD-RW Drive
● Onboard NIC
Advanced Boot
Options This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is
disabled.
Date/Time Allows you to change the date and time.
System Configuration screen options
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
● Disabled
● Enabled
● Enabled w/PXE: This option is enabled by default.
Parallel Port Allows you to configure the parallel port on the docking station. The options are:
●
Disabled
● AT: This option is enabled by default.
● PS2
● ECP
Serial Port Allows you to configure the integrated serial port. The options are:
● Disabled
●
COM1: This option is enabled by default.
● COM2
● COM3
● COM4
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
●
AHCI
● RAID On: This option is enabled by default.
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
BIOS setup 85