Dell Inspiron 3480 Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 138

Dell Inspiron 3480 Скачать руководство пользователя страница 135

Identifier

GUID-EE9A5D95-88BE-4EE7-983E-D97C680BDECD

Status

Released

Enhanced Pre-Boot System Assessment (ePSA)

diagnostics

CAUTION:

Use the ePSA diagnostics to test only your computer. Using this program with other computers may cause invalid

results or error messages.

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device
groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

NOTE:

Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal

when the diagnostic tests are performed.

Identifier

GUID-0B893EED-EFBC-4831-A9C4-7298A7A9F619

Status

Released

Running the ePSA diagnostics

1

Turn on your computer.

2

As the computer boots, press the F12 key as the Dell logo appears.

3

On the boot menu screen, select the

Diagnostics

option.

4

Click the arrow at the bottom left corner.
Diagnostics front page is displayed.

5

Click the arrow in the lower-right corner to go to the page listing.
The items detected are listed.

6

To run a diagnostic test on a specific device, press Esc and click

Yes

to stop the diagnostic test.

7

Select the device from the left pane and click

Run Tests

.

8

If there are any issues, error codes are displayed.
Note the error code and validation number and contact Dell.

Identifier

GUID-700A87A2-F7DE-45C3-8AAA-E6585D53E11B

Status

Released

System diagnostic lights

Power and battery-status light/hard-drive activity light

Indicates the battery-charge status or the hard-drive activity.

NOTE:

Press Fn+H to toggle this light between power and battery-status light and hard-drive activity light.

Troubleshooting

135

«
...
133
134
135
136
137
...
»

Содержание Inspiron 3480











































































































































Отзывы:

Нет отзывов