manualshive.com logo in svg

Dell Inspiron 17 5755, Руководство по обслуживанию

Dell Inspiron 17 5755 - высокопроизводительный ноутбук с большим экраном и мощным процессором. Для получения бесплатного Service Manual, посетите manualshive.com и загрузите руководство пользователя. Это обязательный инструмент для тех, кто хочет максимально использовать возможности этого устройства.

Поделиться
Скачать
background image

Replacing the system board

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before working inside your computer

. After working inside your 

computer, follow the instructions in 

After working inside your 

computer

. For more safety best practices, see the Regulatory 

Compliance home page at dell.com/regulatory_compliance. 

NOTE: Your computer’s Service Tag is stored in the system board. You 
must enter the Service Tag in the BIOS setup program after you replace 

the system board.

NOTE: Replacing the system board removes any changes you have 

made to the BIOS using the BIOS setup program. You must make the 

desired changes again after you replace the system board.

 

Procedure

CAUTION: To avoid damaging the system board, ensure that no cables 
are placed under it.

1 

Connect the power-adapter port cable to the system board.

2 

Slide the I/O-board cable into the connector and press down the latch to 

secure the cable.

3 

Turn the system board over.

4 

Slide the ports on the system board into the slots on the palm-rest 

assembly.

5 

Align the screw hole on the system board with the screw hole on the 

palm-rest assembly.

6 

Replace the screw that secures the system board to the palm-rest 

assembly.

7 

Adhere the I/O board cable to the palm-rest assembly.

8 

Slide the display cable into the connector and press down the latch to 

secure the cable to the system board.

9 

Turn the computer over and open the display.

10 

Slide the power-button board cable and touchpad cable into the 

respective connectors and press down the latches to secure the cables.

65

Содержание Inspiron 17 5755













































































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 17 5755

Бренды по названию

Популярные бренды

Загрузить еще бренды