manualshive.com logo in svg

Dell Inspiron 17 5000 Series, Руководство по обслуживанию

Поделиться
Скачать
Dell Inspiron 17 5000 Series Скачать руководство пользователя страница 111

GUID-6E8EB3EE-1462-4719-82F6-6728469D27E2

Diagnostics

Power and battery-status light/ hard-drive activity light

Indicates the battery-charge status or the hard-drive activity.

NOTE: Press Fn+H to toggle this light between power and battery-status 
light and hard-drive activity light.

Hard-drive activity light

Turns on when the computer reads from or writes to the hard drive.

Power and battery-status light

Indicates the power and battery-charge status.

Solid white

 – Power adapter is connected and the battery has more than 5 percent 

charge.

Amber

 – Computer is running on battery and the battery has less than 5 percent 

charge.

Off

•

Power adapter is connected and the battery is fully charged.

•

Computer is running on battery and the battery has more than 5 percent charge.

•

Computer is in sleep state, hibernation, or turned off.

The power and battery-status light blinks amber along with beep codes indicating 
failures.
For example, the power and battery-status light blinks amber two times followed by a 
pause, and then blinks white three times followed by a pause. This 2,3 pattern 
continues until the computer is turned off indicating no memory or RAM is detected.
The following table shows the different power and battery-status light patterns and 
associated problems.

Light Pattern

Problem description

2,1

CPU failure

2,2

System board: BIOS and ROM failure

2,3

No memory or RAM detected

111

Содержание Inspiron 17 5000 Series



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды